The steps of painting, processing, foundation and finishing stages to obtain the best quality

Paints steps are the main key to obtaining high quality paints in decoration projects. The steps for implementing the paints are in three main stages, as follows:

Paints steps
First – the stage of processing:
Before starting the painting work, it must be ensured that the oyster is dry and of its quality, especially at the edges and the areas where the walls meet (corner).
The beginning is by making a rough sanding of the walls using a sanding stone to overcome the protrusions and reach smooth and flat walls.
The walls are washed with clean (salt-free) water to get rid of any dirt or dust produced during the sanding process.
In the event of any cracks appearing in the walls, these cracks must be opened and filled with hard putty designated for that purpose.

Second – Foundation stage:
After preparing the walls, the first primer primer (sealer) is applied in order to prepare the walls for painting work.
A first layer of putty is made on the wall, then sanding is done using medium sandpaper.
It should be noted that the primer and putty are of the same type of paint to unify work specifications and ensure the quality of cohesion between materials.
A second face of the paste is made in a slightly different color from the first, so that we can distinguish the parts that have been covered with one or two sides of the paste, then a fine sanding face is made.
After each stage of putty and sanding, the walls must be cleaned of dust, either by brushing or using compressed air.
Fluorescent lighting is used to pass close to the walls to detect any defects by working through the presence of shadows,
If any defects are noticed in the walls, an additional layer of putty is made with fine sandpaper.
Upon completion of all putty and sanding work, the walls are cleaned and a second layer of primer paint (Sealer) is made.

Third – Finishing stage:
The finishing stage begins with making the first layer of paint in what is known as the lining, and it is of the same color as the desired color.
An additional lining is made from the same paint to ensure full coverage and color coverage.
Finally, the third and final layer of paint is done after the completion of the other finishing works and the absence of any workers on the site.

Compliance with the previous three stages is an important thing in order to obtain great results and high quality paints. In addition to the quality of choosing materials and knowing the necessary steps before buying paints. As well as the selection of skilled workers, and knowledge of the difference between the types of paints, especially water-based and oil paints, as they are the most used in decoration projects.